Our goal is to provide manufacturers with the most suitable solutions while acting in an environmentally conscious manner, valuing human labor, and growing sustainably in strong harmony with our business partners. Thanks to the long-term and trust-based collaborations we have established with our suppliers, we aim to add value both to our country and to our company.
| MODEL | UNIT | UBM-13042RT | ||||
| TABLE | Table Size | mm | 1600x1400 x0.001° | |||
| T-Slots | mm | 24x7 | ||||
| Maximum Workpiece Weight | kg | 8000 | ||||
| TRAVEL | X Axis | mm | 4200 | |||
| Y Axis | mm | 2000(2500,3000) | ||||
| Z Axis | mm | 2000(2500) | ||||
| W Axis | mm | 700(900) | ||||
| SPINDLE | Diameter | mm | Ø 130 | |||
| Spindle Speed | rpm | 10~2000(2500)(3000) | ||||
| Taper | 7/24 taper, ISO.50, BT-50 | |||||
| DISTANCES | Distance Between Spindle Center and Table | mm | 0~2000(0~2500,0~3000) | |||
| Distance Between Spindle Nose and Table | mm | -150~2250 | ||||
| Distance Between Table Surface and Floor | mm | 1260 | ||||
| FEED RATE | X/Y/Z Rapid Traverse | m/min | 10 | |||
| W Rapid Traverse | m/min | 6 | ||||
| Minimum Setting | mm/min | 0.001 | ||||
| Cutting Speed | mm/min | 1~5000 | ||||
| MOTOR | Spindle Servo Motor-cont./ 30min | kW | 15/18.5 (22/26) | |||
| Axis Motors X / Y / Z / W / B | kW | 7/7/7/4/7 | ||||
| Lubrication Motor | kW | 0.15 | ||||
| Hydraulic Pump | kW | 2.25 | ||||
| Cooling Pump | kW | 1.17 | ||||
| Chip Conveyor Motor | kW | 0.2 | ||||
| Oil Cooling Pump | kW | 0.75 | ||||
| ATC | Tool Capacity | pcs | 40(60) | |||
| Tool Selection | Absolute | |||||
| Tool Change Time | sec | 15 | ||||
| Max. Tool Diameter / Length | mm | Ø 125/ Ø 250(Without Adjacent Tool)/ Length 400 | ||||
| Max. Tool Weight | kg | 25 | ||||
| COOLANT & LUBRICATION | Coolant Tank Capacity | L | 400 | |||
| Hydraulic Tank Capacity | L | 80 | ||||
| Lubrication Tank Capacity | L | 8 | ||||
| MISCELLANEOUS | Power | kVA | 55 | |||
| Air Pressure | kg/cm² | 6 | ||||
Türkçe